diaphragm valve DV-5625-H
Product ID: DV-5625-H
1.280,50 EUR *
Cantitate | Preț unitar |
---|---|
Pentru a 3 |
1.280,50 EUR*
|
Pentru a 9 |
1.242,09 EUR*
|
Pentru a 24 |
1.216,48 EUR*
|
De la 25 |
1.152,45 EUR*
|
The DV-5625-H diaphragm dispensing valve is suitable for low to medium viscosity range materials, as the diaphragm isolates the liquid contacting parts from the control unit. These are optimal operating conditions for dispensing cyanoacrylates, paints, inks, electrolytes, glue, alcohols and other low viscous substances. The DV-5625-H diaphragm valve has a material chamber made of PE-UHMW. This metering valve is mounted horizontally.
Feature
The valve is opened by a pulse of compressed air. An integrated spring closes the valve. The DV-5625-H valve clearly proves its superiority, especially for high-frequency dispensing cycles of small dispensing quantities. The respective quantities can be precisely adjusted by fine adjustment at the valve head. The Luer Lock connection has a very small dead volume.
Typical products
Adhesives, acids, alcohol/methanol, anaerobics, bases, cyanoacrylates, oils/greases/lubricants, solvents
Varianta motor (E): | pneumatic |
---|---|
Actuator: | closed (NC) |
Cantitatea de dozare (min.) (ml): | 0.001 |
Compatibil cu...(E): | AcidsAdhesivesAlcohol / methanolAnaerobic adhesivesCyanacrylateInks and coloursOil, greases, lubricantsProtective lacquersSolventsUV adhesivesWater |
Contact material (E): | FDA compliantPP clearPTFE |
Debit: | 300 ml/min (H2O, 2 bar) |
Diametru exterior Ø (mm): | 27 |
Dozare forme (E): | liniipuncte |
Frequence: | 500 cycle/min |
Greutate #2 (g): | 64 |
Lungime (mm): | 80 |
Material: | UHMW-PE |
Material fabricat din: | PE-UHMW |
Metoda de dozare (E): | pneumatic (pressure & time) |
Tip Ieșire material_: | Luer-Lock |
Tip intrare material: | 1/8" |
Viscosity: | low viscositymedium viscosity |
Vâscozitate material (max.): | 50.000 mPas |