2K-adhesive, 50 ml

Solvent-free two-component adhesive based on epoxy resin for highest loads in the double chamber cartridge. The easy-to-use dual chamber cartridge with the practical mixers allows automatic mixing of the 2 components and is easy and clean to use. The processing time is up to 90 minutes. Curing time and final strength (up to 30 N / mm²) are temperature dependent. At room temperature after 12 hours. The adhesive bond is impact resistant, resistant to aging and moisture.

Materials

Glues metals, glass, porcelain, ceramics, wood, marble, stone, concrete, thermoset, glass fiber reinforced plastics, rigid PVC, rubber, rigid foam plastics, e.g. Styrofoam. Unsuitable for gluing on large glass surfaces, PE, PP.

Processing

Adhesive surfaces must be dry, free of dust and grease. Roughen smooth surfaces. Insert the adhesive cartridge into the dispenser. Open the cap and attach a static mixer. Binder and hardener are mixed automatically in the ratio 1: 1. Adhesive on one side, apply on both sides for rough materials. Assemble parts fitting without pressing. After bonding, place the mixer and place the cap on the adhesive cartridge. Since the adhesive residues in the mixer harden after use, the mixer can be disposed of. Please observe the safety instructions in the technical data sheet and the safety data sheet.

 

Temperature range -20° C to + 100° C

UHU PLUS ENDFEST 300 has a UL approval.