diaphragm valve DV-5625-H
PE-UHMWE material block, for low to medium viscosity range materials, no metal contactProduct ID: DV-5625-H
€1,280.50 / piece
Quantity | Unit price |
---|---|
To 3 |
€1,280.50*
|
To 9 |
€1,242.09*
|
To 24 |
€1,216.48*
|
From 25 |
€1,152.45*
|
The DV-5625-H diaphragm dispensing valve is suitable for low to medium viscosity range materials, as the diaphragm isolates the liquid contacting parts from the control unit. These are optimal operating conditions for dispensing cyanoacrylates, paints, inks, electrolytes, glue, alcohols and other low viscous substances. The DV-5625-H diaphragm valve has a material chamber made of PE-UHMW. This metering valve is mounted horizontally.
Feature
The valve is opened by a pulse of compressed air. An integrated spring closes the valve. The DV-5625-H valve clearly proves its superiority, especially for high-frequency dispensing cycles of small dispensing quantities. The respective quantities can be precisely adjusted by fine adjustment at the valve head. The Luer Lock connection has a very small dead volume.
Typical products
Adhesives, acids, alcohol/methanol, anaerobics, bases, cyanoacrylates, oils/greases/lubricants, solvents
Actuator: | closed (NC) |
---|---|
Ausbringungsform (E): | Lines (string/rope)Points (dot) |
Dispensing method: | pneumatic (pressure & time) |
Dispensing quantity (min.) (cc): | 0.001 |
Drive: | pneumatic |
Flow rate : | 300 ml/min (H2O, 2 bar) |
Frequence: | 500 cycle/min |
Length (mm): | 80 |
Material: | UHMW-PE |
Material dispensed: | AcidsAdhesivesAlcohol / methanolAnaerobic adhesivesCyanacrylateInks and coloursOil, greases, lubricantsProtective lacquersSolventsUV adhesivesWater |
Material inlet: | 1/8" |
Material outlet: | Luer-Lock |
Material viscosity (max): | 50.000 mPas |
Outer Ø (mm): | 27 |
Viscosity: | low viscositymedium viscosity |
Weight (g): | 64 |
Wetted parts: | PE-UHMW |
Wetted parts (E): | FDA compliantPP clearPTFE |