Dosierventile | Dosieren - EN

Dispensing Valves

Using a dispensing valve, as part of the system, provides control for precise dispensing of liquids and pastes. Depending on the type of application, the valve controls the precise flow of the material. Different materials require the use of a specific configuration valve. Precise valve controllers are used to control the operation of the valves.

Using a dispensing valve, as part of the system, provides control for precise dispensing of liquids and pastes. Depending on the type of application, the valve controls the precise flow of the... read more »
Close window

Using a dispensing valve, as part of the system, provides control for precise dispensing of liquids and pastes. Depending on the type of application, the valve controls the precise flow of the material. Different materials require the use of a specific configuration valve. Precise valve controllers are used to control the operation of the valves.

1 # # From 2
No results were found for the filter!
volume dispenser preeflow® eco-PEN450
Endless piston principle, flow rate 0,5 up to 6,0 cc/min
Art.-Nr.   ECO-PEN450
Volumenventil preeflow® eco-PEN450
The preeflow® eco-PEN450 is a volumetric dispensing system. In this system the proven technology of the eccentric screw pump is designed and manufactured in a miniaturized version. New manufacturing processes and materials are used to...
* €2,886.12
volume dispenser preeflow® eco-PEN300
Endless piston principle, flow rate 0,12 up to 1,48 cc/min
Art.-Nr.   ECO-PEN300
Volumenventil preeflow® eco-PEN300
The preeflow® eco-PEN300 is a volumetric dispensing system. In this system the proven technology of the eccentric screw pump is designed and manufactured in a miniaturized version. New manufacturing processes and materials are used to...
* €3,293.04
volume dispenser preeflow® eco-PEN600
Endless piston principle, flow rate 1,4 up to 16 cc/min
Art.-Nr.   ECO-PEN600
Volumenventil preeflow® eco PEN600
' The preeflow® eco-PEN600 is a volumetric dispensing system. In this system the proven technology of the eccentric screw pump is designed and manufactured in a miniaturized version. New manufacturing processes and materials are used to...
* €3,157.32
volume dispenser preeflow® eco-PEN700
Endless piston principle, flow rate 5,3 up to 60 cc/min, for fluids in lower and medium viscosity range
Art.-Nr.   ECO-PEN700
Volumenventil preeflow® eco-PEN700
The preeflow® eco-PEN700 is a rotating, pressure-sealed displacement system. It consists of a stainless steel rotor and an elastomer stator that together form a closed system. With this arrangement a closed "single volume" chambers are...
* €3,632.04
volume dispenser preeflow® eco-PEN330
Endless piston principle, flow rate 0,2 up to 3,3 cc/min
Art.-Nr.   ECO-PEN330
Volumenventil preeflow® eco-PEN330
' The preeflow® eco-PEN330 is a volumetric dispensing system. In this system the proven technology of the eccentric screw pump is designed and manufactured in a miniaturized version. New manufacturing processes and materials are used to...
* €3,072.36
volume dispenser DV-8000
Volumetric dispensing, flow rate up to 24 ml/min
Art.-Nr.   DV-8000
Volumenventil DV-8000
' Compact volume valve model DV-8000 enables very precise and uniform volumetric dispensing with a wide range of materials. With the special rotor-stator geometry, a valve is not required to prevent the material to flow out on its own....
* €6,054.00
Jet Valve DV-6220
Based on piezo technology, for medium- up to high viscously materials
Art.-Nr.   DV-6220
Jet Valve DV-6220
The DV-6220 is a high-speed jet valve with a highly efficient piezo actuator for the contactless dispensing of medium- to high-viscosity media of up to 2,000,000 mPas. The high-speed piezo technology accelerates the dispensing cycles and...
Jet valve DV-6210
Based on piezo technology, for low viscously materials
Art.-Nr.   DV-6210
Jet valve DV-6210
The DV-6210 is a high-speed jet valve with a highly efficient piezo actuator for the contactless dispensing of medium- to high-viscosity media of up to 2,000,000 mPas. The high-speed piezo technology accelerates the dispensing cycles and...
diaphragm valve DV-5625-U
POM body, for fluids in lower and medium viscosity range
Art.-Nr.   DV-5625-U
Membranventil DV-5625-U
' The diaphragm dispense valve DV-5625-U is extremely well suited for fluids in lower and medium viscosity range, since the diaphragm 
* €1,068.00
diaphragm valve DV-5625SS
Stainless steel body, for fluids in lower and medium viscosity range
Art.-Nr.   DV-5625SS
Membranventil DV-5625SS
' The diaphragm dispense valve DV-5625SS is excellently well suited for fluids in lower and medium viscosity range, since the diaphragm 
* €1,290.00
needle valve DV-5425
Aluminum, is especially for dispensing low to medium viscosity materials
Art.-Nr.   DV-5425
Nadelventil DV-5425
The needle valve DV-5425 was especially developed for dispensing of low to medium viscosity materials. The DV-5425 needle valve enables control of material from extremely small individual shots to continuous beads. The needle dispensing...
* €1,092.00
needle valve DV-5425SS
Stainless steel, is especially for dispensing low to medium viscosity materials
Art.-Nr.   DV-5425SS
Nadelventil DV-5425SS
' The needle valve DV-5425SS 
* €1,290.00
needle valve Micro shot TS-5440
Is a pneumatically operated dispensing valve out of stainless steel
Art.-Nr.   TS-5440SS
Nadelventil Microshot TS-5440
' The micro-dosing needle valve TS-5440SS dispense very precise deposits over a wide range of shot and bead sized due to a minimal dead fluid one. An external stroke control adjustment to fine-tune shot sizes. Easy to maintain, with...
* €1,608.00
Mini Spool valve DV-5325
'aluminum, valve design enables very accurate dispensing of medium to high viscosity materials
Art.-Nr.   DV-5325
Rückzugsventil DV-5325
Das Rückzugsventil 5325 dosiert mittelviskose bis hochviskose Material sehr genau. Durch die kompakte Bauweise kann das Ventil in automatischen Linien und unter beengten baulichen Bedingungen eingesetzt werden. Das Dosierventil wird...
* €1,032.00
Mini Spool Valve DV-5325SS
Stainless steel, valve design enables very accurate dispensing of medium to high viscosity materials
Art.-Nr.   DV-5325SS
Rückzugsventil DV-5325SS
' The Mini Spool valve DV-5325SS is designed to very accurately dispense medium to high viscosity materials. The valve DV-5325SS has got valve body made of stainless steel (WNr. 1.4305, AISI 303). The compact construction of this...
* €1,161.60
Mini Spool Valve DV-5325PEEK
PEEK material block, for low to medium viscosity materials
Art.-Nr.   DV-5325PEEK
Rückzugsventil DV-5325Peek
' The Mini Spool valve DV-5325PEEK is designed to very accurately dispense medium to high viscosity materials. The valve DV-5325PEEK has got valve body made of PEEK. The compact construction of this dispensing valve enables usage in...
* €1,098.00
High Pressure Spool Valve 790HP
Aluminum, for processing of high viscosity media like silicones
Art.-Nr.   790HPNM-LF
Hochdruckventil  790HP
The high pressure spool valve Model 790HP is manufactured with a valve body made of aluminium. This valve is ideally suited for controlled dispensing of high viscosity materials such as silicones (RTV), sealants and greases and various...
* €726.00
High Pressure Spool Valve 790HPSS
Stainless steel, for dispensing of high viscosity materials such as silicones, RTV’s, thick pastes
Art.-Nr.   790HPSSNM-LF
Hochdruckventil  790HPSS
' The high pressure spool valve Model 790HPSS is manufactured with a valve body made of stainless steel (WNr. 1.4305, AISI 303). This valve is ideally suited for controlled dispensing of high viscosity materials such as silicones (RTV),...
* €1,218.00
spray valve eco-SPRAY
Endless piston principle, volumetric spray 0,5 up to 6,0 ml/min for low to high viscosity spray media
Art.-Nr.   ECO-SPRAY450
spray valve eco-SPRAY
' The precision volume dispenser eco-SPRAY by ViscoTec supports many applications for the low- to high-viscosity materials. The preeflow® eco-SPRAY guarantees a volumetric dispensing based on the endless piston principle. The basis for...
* €3,639.00
spray valve SV-1000
Min 20 mm spray range for low to medium viscosity materials, valve body stainless steel
Art.-Nr.   SV-1000SS
Sprühventil SV-1000
' The spray valve Model SV-1000SS has been specially developed for spraying of low to medium viscosity materials to produce round spray patterns. The very good adjustment options guarantee a fine spraying operation. Control unit model...
* €1,118.40
Sprühventil SV-2001N
Ab 3 mm Sprühbreite, für nieder- bis mittelviskose Medien, Ventilkörper Edelstahl
Art.-Nr.   SV-2001N
SV-2001N
Das Sprühventil SV-2001N kann sehr kleine Mengen nieder- und mittelviskoser Medien sprühen. Dabei wird das Material in einer Kartusche oder einem Druckbehälter bevorratet und dem Ventil direkt aus der Kleinkartusche oder über einen...
* €1,224.00
spray valve SV-2000
Min 3 mm spray range for low to medium viscosity materials, valve body stainless steel
Art.-Nr.   SV-2002N
Sprühventil SV-2002N
' The spray valve Model SV-2000 can spray very small amounts of low and medium viscosity fluids in a uniform and controlled manner. The material, which is stored in a barrel, cartridge or a pressure vessel, is fed to the valve directly...
* €1,297.80
spray valve SV-2000
Min 3 mm spray range for low to medium viscosity materials, valve body stainless steel
Art.-Nr.   SV-2003N
Sprühventil SV-2003N
' The spray valve Model SV-2000 can spray very small amounts of low and medium viscosity fluids in a uniform and controlled manner. The material, which is stored in a barrel, cartridge or a pressure vessel, is fed to the valve directly...
* €1,476.00
screw valve DV-5005
The valve’s plastic auger can be quickly replaced
Art.-Nr.   DV-5005DFS
Spindelventil DV-5005
Model DV-5005 screw valve is designed to dispense medium to high viscosity materials. The valve uses a replaceable screw auger to dispense two-component materials as well as materials that are abrasive such as solder pastes, filled...
* €2,409.60
1 # # From 2
* Alle Preise zzgl. MwSt. und Versand
Viewed