Autocan Pump DA35
inclusive follower plate up to interior Ø 170 mm, stroke 215 mm
Art. Nr.: 504725
Product ID: DA35-220
Product ID: DA35-220
Product information "Autocan Pump DA35"
The DA35 Autocan piston pump transfers high viscosity media from small containers. Simply remove the cover from the container and set the container under the piston pump. Then slide the pump into the container. The entire medium underneath the punch is pushed out except for small residual amounts and, for example, is transferred to a high pressure valve 790HPNM that can be equipped with a grip holder (optional). The valve is controlled via the dispensing device DC1060 and a switch on the grip holder. The system is suitable for manual or time-controlled dispensing and eliminates dripping. Cartridges can also be filled with a corresponding fitting!
Features:
- Low waste quantities
- No contamination of the material
- No decanting of the material required
TECHNICAL DATA:
- Maximum fluid outlet pressure: 60 bar
- Pressure range of the main compressed air supply: 2.4-7.0 bar
- Maximum viscosity of the fluid: 300,000 mPas
- Volume per stroke: 5.0 cm3
- Recommended pump speed for continuous operation: 40 cpm
- Maximum recommended pump speed: 60 cpm
- Stroke: 19 mm
- Air inlet size: 1/4 / Ø 6 mm
- Fluid outlet size: 1/4 npt(f )
- Wetted parts material: 304 and 17-4 pH stainless steel; PTFE, Viton, PEEK
- Noise pressure level at 7 bar, 40 cpm: 64.12 dB(A)
- Sound power level at 7 bar, 40 cpm: 70.84 dB(A)
Temperature: | 20 - 40 °C |
---|
Technical specifications
Operation:
pneumatisch
Weight:
15 kg
Temperature:
20 - 40 °C
Shipping weight:
18.6 kg