Materialzufuhr (Zubehör Pumpen und Materialbehälter) | Dosieren - EN
No results were found for the filter!
cartridge filling system
For 310 cc cartridges to fill barrels 3 cc - 55 cc
Art.-Nr.   990150-B
Kartuschenfüllgerät
' With cartridge filling device 990150-B (metal), greases, epoxy resins, silicones, soldering pastes and other materials can be efficiently transferred into small cartridges. To control the process, the cartridge filling devices can be...
* €760.14
cartridge filling system
For 180 cc cartridges to fill barrels 3 cc - 55 cc
Art.-Nr.   990150-A-180
Kartuschenfüllgerät
With the cartridge filling device, 180 cc Semco® cartridges can be efficiently filled with grease, epoxy resin, silicone or solder paste into small cartridges. The filling device has a metal cartridge case. It is suitable for...
* €612.00
cartridge filling system
For 360 cc cartridges to fill barrels 3 cc - 55 cc
Art.-Nr.   990150-A-360
cartridge filling system
With cartridge filling device 560022-M, greases, epoxy resins, silicones, soldering pastes and other materials can be efficiently transferred into small cartridges. To control the process, the cartridge filling devices can be connected...
* €612.00
Autocan Pump DA35
Inclusive follower plate up to interior Ø 170 mm, stroke 215 mm
Art.-Nr.   DA35-220
Autocan Pump DA35
The DA35 Autocan piston pump transfers high viscosity media from small containers. Simply remove the cover from the container and set the container under the piston pump. Then slide the pump into the container. The entire medium...
* €7,020.00
mini pump
For small containers up to 1 l can, including follower plate
Art.-Nr.   990243
mini pump
The compressed air supply system of this mini pump is the ideal and cost-effective system for pumping expensive lubricants, including silicone greases and oils, from small containers. The pump can be easily, quickly and directly...
* €2,286.00
Follower plate for piston pump DA35
Art.-Nr.   DA35-1KG
Folgeplatte für Kolbenpumpe DA35
We adapt the follower plate exactly to your container. Please indicate the inside diameter when ordering. We are happy to advise you.
* €1,019.70
Hobbock Pump
Hobbock Pump
Art.-Nr.   990244A-SIL
Hobbock Pump
' High viscosity materials can be dispensed directly out of containers with 10 to 50 kg by this Hobbock pump. The used following plate as to be adapted individually to your container. For tapping dispensing material the container has to...
* €10,710.00
follower plate
For manual filling pump
follower plate
The follower plate wipes off the wall of the storage tank and pushes the dosing material towards the riser pipe. The follower plates should be selected to match the diameter of the storage container. In addition, the rubber ring can be...
from * €58.40
mounting cross
For manual filling pump
mounting cross
'The fixing cross ensures that the manual filling pump remains in place in the storage tank of the dosing medium and is screwed to the riser pipe and the upper edge of the tank.
from * €80.46
cover main article
For manual filling pump
cover main article
The dust cover protects the dosing material in the hopper from contamination and is held in position by the riser pipe and rests on the mounting cross on the upper edge of the hopper.
from * €58.40
Handpump Series
For pasty media from small containers
Handpump Series
With the hand pump, cartridges from 3 cc to 360 cc can be filled with highly viscous material directly from the original container. The fixing cross is attached to the edge of your container and thus ensures a secure hold of the pump....
from * €313.94
NEW
Tube adapter with core bore for 180 and 240 cc...
Threaded nozzle for hand pistol 180 and 240 cc
Art.-Nr.   880001-Blank
Tubenadapter mit Kernbohrung
This special tube adapter has no internal thread, but just a core bore in order to manufacture any indivudial thread which might be needed. With the tube adapter, a standard manufacture´s "collapsible" tube can be used in combination...
* €36.90
NEW
Tube adapter "A" for 180 and 240 cc barrels
Threaded nozzle for hand pistol 180 and 240 cc
Art.-Nr.   880001A
Tubenadapter "A"
With the tube adapter, a standard tube can be screwed into a 180 or 240 cc large barrel. This makes it possible to carry out the dispensing process using compressed air without having to squeeze the tube by hand. "Autotube" adapter A
* €49.32
NEW
Tube adapter "B" for 180 and 240 cc barrels
Threaded nozzle for hand pistol 180 and 240 cc
Art.-Nr.   880001B
Tubenadapter "B"
With the tube adapter, a standard tube can be screwed into a 180 or 240 cc large barrel. This makes it possible to carry out the dispensing process using compressed air without having to squeeze the tube by hand. "Autotube" adapter B
* €49.32
NEW
Tube adapter "C" for 180 and 240 cc barrels
Threaded nozzle for hand pistol 180 and 240 cc
Art.-Nr.   880001C
Tubenadapter "C"
With the tube adapter, a standard tube can be screwed into a 180 or 240 cc large barrel. This makes it possible to carry out the dispensing process using compressed air without having to squeeze the tube by hand. "Autotube" adapter C
* €49.32
NEW
Tube adapter "D" for 180 and 240 cc barrels
Threaded nozzle for hand pistol 180 and 240 cc
Art.-Nr.   880001D
Tubenadapter "D"
With the tube adapter, a standard tube can be screwed into a 180 or 240 cc large barrel. This makes it possible to carry out the dispensing process using compressed air without having to squeeze the tube by hand. "Autotube" adapter D
* €49.32
NEW
Tube adapter "Special" for 180 and 240 cc barrels
Threaded nozzle for hand pistol 180 and 240 cc
Art.-Nr.   880001-SPEZ
Tube adapter "Special" for 180 and 240 cc barrels
This special tube adapter has a special, customized internal thread, in order to fit to an indivudial tube. With the tube adapter, a standard manufacture´s "collapsible" tube can be used in combination with a 180 or 240 cc cartridge...
* €154.50
* All prices excl. VAT and shipping
Viewed