No results were found for the filter!
cartridge filling system
![Kartuschenfüllgerät]( "Kartuschenfüllgerät")
For 310 cc cartridges to fill barrels 3 cc - 55 cc
Art.-Nr. 990150-B
' With cartridge filling device 990150-B (metal), greases, epoxy resins, silicones, soldering pastes and other materials can be efficiently transferred into small cartridges. To control the process, the cartridge filling devices can be...
*
€633.45
cartridge filling system
![Kartuschenfüllgerät]( "Kartuschenfüllgerät")
For 180 cc cartridges to fill barrels 3 cc - 55 cc
Art.-Nr. 990150-A-180
With the cartridge filler, liquids and pastes such as grease, epoxy resin, silicone or solder paste from 180cc Semco® cartridges can be efficiently transferred into small cartridges from 3 cc to 55 cc. The filling device has a metal...
*
€510.00
cartridge filling system
![cartridge filling system]( "cartridge filling system")
For 360 cc cartridges to fill barrels 3 cc - 55 cc
Art.-Nr. 990150-A-360
With the cartridge filler, liquids and pastes such as grease, epoxy resin, silicone or solder paste from 360cc Semco® cartridges can be efficiently transferred into small cartridges from 3 cc to 55 cc. The filling device has a metal...
*
€510.00
follower plate
![follower plate]( "follower plate")
For manual filling pump
The follower plate wipes off the wall of the storage tank and pushes the dosing material towards the riser pipe. The follower plates should be selected to match the diameter of the storage container. In addition, the rubber ring can be...
from * €48.67
mounting cross
![mounting cross]( "mounting cross")
For manual filling pump
'The fixing cross ensures that the manual filling pump remains in place at the storage tank of the dispensing liquid and is screwed to the riser pipe and the upper edge of the tank.
from * €67.05
cover main article
![cover main article]( "cover main article")
For manual filling pump
The dust cover protects the dosing material in the hopper from contamination and is held in position by the riser pipe and rests on the mounting cross on the upper edge of the hopper.
from * €48.67
Autocan Pump DA35
![Autocan Pump DA35]( "Autocan Pump DA35")
Inclusive follower plate up to interior Ø 170 mm, stroke 215 mm
Art.-Nr. DA35-220
The DA35 Autocan piston pump transfers high viscosity media from small containers. Simply remove the cover from the container and set the container under the piston pump. Then slide the pump into the container. The entire medium...
*
€5,850.00
vacuum pick-up tool VPP803
![Vakuumpinzette VPP803-LF]( "Vakuumpinzette VPP803-LF")
Manual, inclusive 3 vacuum tip and 5 suction cup
Art.-Nr. VPP803-LF
'The vacuum tweezers VPP 803 are particularly suitable for the gentle treatment of small parts. To pick up small parts, close the opening of the vacuum tweezers with your finger. To remove the small parts, remove the finger from the...
*
€262.65
vacuum pick-up tool VPPE511-LF
![Vakuumpinzette VPPE511-LF]( "Vakuumpinzette VPPE511-LF")
Electric, inclusive 3 vacuum tip and 5 suction cup
Art.-Nr. VPPE511-LF
The VPPE 511 vacuum tweezers are equipped with a compressed air solenoid valve which is electrically controlled via a foot switch. This has two advantages: 1. the vacuum is only built up when the foot switch is pressed 2. the workpiece...
*
€602.00
sensor preeflow® flowplus16
![Fluidsensor preeflow® flowplus16]( "Fluidsensor preeflow® flowplus16")
Flow rate up to 100 ml / min (depending on medium)
Art.-Nr. ECO-FLOWPLUS16
Sensor flowplus16
*
€610.00
preeflow® flowscreen
![Auswerteeinheit preeflow® flowscreen]( "Auswerteeinheit preeflow® flowscreen")
For max. 2 fluid pressure sensors flowplus16
Art.-Nr. ECO-FLOWSCREEN
'The flowscreen evaluation system was developed for monitoring dosing processes and can be connected to up to two pressure sensors. The pressure values determined from the measurement signals are shown graphically on a display....
*
€936.00
hose sensor
![Schlauchsensor zur Luftblasenerkennung]( "Schlauchsensor zur Luftblasenerkennung")
Hose sensor for air bubble detection
Art.-Nr. 990115-A
The hose sensor for air bubble detection was specially developed for industrial use. The non-contact measuring method is the basic requirement for hygienic and contamination-free applications. The hose is simply placed in the sensor and...
*
€551.05
heater for 5 cc cartridge
![Kartuschenheizung für 5 cc Kartuschen]( "Kartuschenheizung für 5 cc Kartuschen")
20-45° C, 24V DC
Art.-Nr. 990247A-5
Heater for [5cc cartridges] 20-45° C 24V DC
*
€551.00
heater for 10 cc cartridge
![Kartuschenheizung für 10 cc Kartuschen]( "Kartuschenheizung für 10 cc Kartuschen")
20-45° C, 24V DC
Art.-Nr. 990247A-10
Heater for [10cc cartridges] 20-45° C 24V DC
*
€551.00
heater for 30 cc cartridge
![Kartuschenheizung für 30 cc Kartuschen]( "Kartuschenheizung für 30 cc Kartuschen")
20-45° C, 24V DC
Art.-Nr. 990247A-30
Heater for [30cc cartridges] 20-45° C 24V DC
*
€551.00
heater for 55 cc cartridge
![Kartuschenheizung für 55 cc Kartuschen]( "Kartuschenheizung für 55 cc Kartuschen")
20-45° C, 24V DC
Art.-Nr. 990247A-55
Heater for [55cc cartridges] 20-45° C 24V DC
*
€551.00
heater for 310 ml cartridge sleeve Euro
![Kartuschenheizung für 310 ml Kartuschenhülse Euro]( "Kartuschenheizung für 310 ml Kartuschenhülse Euro")
20-80° C, interior Ø 53 mm, 230V AC,
Art.-Nr. 990247-310
Heater for [310cc Euro cartridge] without cartridge sleeve 230V AC, 140W
*
€427.50
Kartuschenheizung für 180-360 cc Kartuschenhülse
![Kartuschenheizung für 360 cc Kartuschenhülse]( "Kartuschenheizung für 360 cc Kartuschenhülse")
'20-80° C, 230V AC,
Art.-Nr. 990247-360
Heizung für [180-360cc Großkartuschen] 230V AC, 140W ohne Kartuschenhülse
*
€427.50
heater for 600 cc cartridge sleeve
![Kartuschenheizung für 600 cc Kartuschenhülse]( "Kartuschenheizung für 600 cc Kartuschenhülse")
20-80° C, 230V AC
Art.-Nr. 990247-600
Heater for [600cc large cartridge] without cartridge sleeve 230V AC, 140W
*
€535.50
heater for 900 cc cartridge sleeve
![Kartuschenheizung für 900 cc Kartuschenhülse]( "Kartuschenheizung für 900 cc Kartuschenhülse")
20-80° C, 140 W
Art.-Nr. 990247-900
Heater for [900cc large cartridge] without cartridge sleeve 230V AC, 140W
*
€535.50
Heater for dispense tip
![Nadelheizung für Dosiernadeln mit Edelstahlkapillare, 20-45° C, 24V DC]( "Nadelheizung für Dosiernadeln mit Edelstahlkapillare, 20-45° C, 24V DC")
20-45° C, 6 W
Art.-Nr. 990238
Needle heater for dispense tips with stainless steel capillaries and a minimum length of half an inch. Specs: 20-45° C 24V DC
*
€352.00
Replacement cap for needle heater
![Ersatzkappe für Nadelheizung, 20-45° C, 24V DC]( "Ersatzkappe für Nadelheizung, 20-45° C, 24V DC")
20-45° C, 6 W
Art.-Nr. 990238-K
Replacement cap for needle heater 20-45° C 24V DC
*
€51.50
heater for dispensing valve DV and SV1000SS
![Ventilheizung für DV-5325 /SS, 5425 /SS, SV1000SS|20-45° C, 24V DC]( "Ventilheizung für DV-5325 /SS, 5425 /SS, SV1000SS|20-45° C, 24V DC")
20-45° C, 20 W
Art.-Nr. 990259
Valve heater for DV-5322, 5420,5520 20-45° C 24V DC
*
€352.50
heater for dispensing valve VP-300
![heater for dispensing valve VP-300]( "heater for dispensing valve VP-300")
20-45° C, 20 W
Art.-Nr. 990259-29
Valve heater for dosing valve VP-300 20-45° C 24V DC
*
€352.50
* All prices excl. VAT and shipping
Viewed