Products | Dosieren - EN
1 # # From 72
No results were found for the filter!
Shut-off valve for cartridge sleeve
Spare part for sleeve 990269, 3/2 ways with ventilation, G1 / 4 ", for hose D = 6 mm outside
Art.-Nr.   990269-010
Absperrventil 3/2 Wege
* €48.67
Pressure relief valve for Euro cartridge sleeve
Spare part for sleeve 990269, 7 bar
Art.-Nr.   990269-011
Überdruckventil 7 bar für Eurokartuschenhülse
* €19.47
Shut-off valve 3/2 way with venting
G1/8", for hose D=6mm outside
Art.-Nr.   990269-013
Absperrventil 3/2 Wege mit Entlüftung
* €48.67
Sensor optical, NPN, M18
For empty message sleeve 990269-B
Art.-Nr.   990269-014
Sensor optical, NPN, M18
* €140.09
Pressure relief valve 18 bar, for Euro...
Spare part for sleeve 990269-BH
Art.-Nr.   990269-016
Überdruckventil 18 bar für Eurokartuschenhülse
* €19.47
Sensor optical, PNP, M18
For empty message sleeve 990269-B
Art.-Nr.   990269-020
Sensor optisch, PNP, M18
* €140.09
Flange Cap for Pinch Tube Valve
Spare part - Flange Cap for Pinch Tube Valve
Art.-Nr.   580024NM
Flanschkappe für Quetschventil
Flange Cap - spare part for Pinch Tube Valve 710PTNM-LF
* €58.62
Cylinder Cap for Pinch Tube Valve
Spare part - Cylinder Cap for Pinch Tube Valve
Art.-Nr.   580023NM
Cylinder Cap for Pinch Tube Valve
Cylinder Cap - spare part for Pinch Tube Valve 710PTNM-LF
* €42.17
Shut-off Piston for Pinch Tube Valve
Spare part - Shut-off Piston for Pinch Tube Valve
Art.-Nr.   580025NM
Quetschkolben für Quetschventil
Shut-off Piston - spare part for Pinch Tube Valve 710PTNM-LF
* €58.71
Spring for Pinch Tube Valve
Spare part - Spring for Pinch Tube Valve
Art.-Nr.   580028NM
Spring for Pinch Tube Valve
Spring - spare part for Pinch Tube Valve 710PTNM-LF
* €17.00
Adjusting Knob for Pinch Tube Valve
Spare part - Adjusting Knob for Pinch Tube Valve
Art.-Nr.   580029NM
Adjusting Knob for Pinch Tube Valve
Adjusting Knob - spare part for Pinch Tube Valve 710PTNM-LF
* €36.00
Gasket for Pinch Tube Valve
Spare part - Gasket for Pinch Tube Valve
Art.-Nr.   580030NM
Gasket for Pinch Tube Valve
Gasket - spare part for Pinch Tube Valve 710PTNM-LF
* €4.89
U-cup seal for Pinch Tube Valve
Spare part - U-cup seal for Pinch Tube Valve
Art.-Nr.   580031NM
Kolbendichtung für Quetschventil
U-cup seal - spare part for Pinch Tube Valve 710PTNM-LF
* €20.03
Rod mount for Pinch Tube Valve
Spare part - Rod mount seal for Pinch Tube Valve
Art.-Nr.   580033NM
Haltestange für Quetschventil
Rod mount - spare part for Pinch Tube Valve 710PTNM-LF
* €56.65
Jam nut for Pinch Tube Valve
Spare part - Jam nut seal for Pinch Tube Valve
Art.-Nr.   580036NM
Gegenmutter für Quetschventil
Jam nut (1/4-28) - spare part for Pinch Tube Valve 710PTNM-LF
* €12.17
Hose Barb with washer for Pinch Tube Valve
Spare part - Hose Barb with washer for Pinch Tube Valve
Art.-Nr.   580032NM
Hose Barb with washer for Pinch Tube Valve
Hose Barb with washer - spare part for Pinch Tube Valve 710PTNM-LF
* €4.48
Fitting 1/4'' 90° angeled, PP
Fitting 1/4'' 90° angeled, PP
Art.-Nr.   F-12X10-1_4-90
Fitting 1/4'' 90° angeled, PP
Fitting 1/4'' 90° angeled, PP
* €21.42
Fitting 3/4'' straight, PP
Fitting 3/4'' straight, PP
Art.-Nr.   F-12X10-3_8
Fitting 3/4'' straight, PP
Fitting 3/4'' straight, PP
* €21.42
Material pressure regulator 10 to 50 bar with...
Material pressure regulator 10 to 50 bar with pressure indicator
Art.-Nr.   990265-50
Material pressure regulator 10 to 50 bar with pressure indicator
Pressure control is essential for a balanced material system. This controller enables your system to achieve higher productivity thanks to robust and precise pressure regulation. 10 to 50 bar / 145-725 psi with pressure indicator Inlet...
* €1,242.00
Material pressure regulator 1 to 10 bar with...
Material pressure regulator 1 to 10 bar with pressure indicator
Art.-Nr.   990265
Materialdruckminderer
Pressure control is essential for a balanced material system. This controller enables your system to achieve higher productivity thanks to robust and precise pressure regulation. 1 to 10 bar / 15-145 psi with pressure indicator Inlet...
* €1,242.00
Fitting M8 straight, stainless steele
Fitting M8 straight, stainless steele
Art.-Nr.   F-8x6-M8-SS-01
F-8x6-M8-SS-01
Fitting M8 straight, stainless steele for material hose 8x6 mm
* €23.50
2K-Adapter for double cartridge, stainless steele
2K-Adapter for double cartridge, stainless steele, 1:1, 2:1
Art.-Nr.   990146-A
2K-Adapter for double cartridge, stainless steele
With the help of this 2K separating adapter it is possible to connect two material hoses to a double cartridge instead of a mixing tube. In this way, for example, two eco-PENs can be supplied with material. The 2K adapter fits the 200 ml...
* €315.00
Winkelverstellung für 4-Achsroboter
Winkelverstellung für 4-Achsroboter mit 10er Welle (o. U-Schiene, incl. 910100)
Art.-Nr.   990093
Winkelverstellung für 4-Achsroboter
Winkelverstellung für 4-Achsroboter mit 10er Welle (o. U-Schiene, incl. 910100)
Ventilkörper
Ventilkörper, unten, für Ventil DV-5625-U
Art.-Nr.   V-0001
Ventilkörper
Ventilkörper, unten, für Ventil DV-5625-U
* €286.60
1 # # From 72
* All prices excl. VAT and shipping
Viewed