Mini Spool valve DV-5325

Art.-Nr. 504862
Product-ID DV-5325

Aluminum, valve design enables very accurate dispensing of medium to high viscosity materials

885,80 € * / pièce
Množství Cena za kus / pièce
Do 3 885,80 € *
Od 4 859,28 € *
Od 10 841,56 € *

Ceny plus DPH plus náklady na dopravu

Připraveno k odeslání ještě dnes,
Dodací doba cca. 1-3 pracovní dny

The 5325 suck-back valve dispenses medium to high viscosity fluids very accurately. Due to its compact design, the valve can be used in automatic lines and under cramped structural conditions. The dispensing valve is pneumatically controlled. Due to the suck-back effect an exact fluid break-off is achieved. The retraction stroke can be adjusted via an adjusting screw.

Mode of operation:
The valve is closed in the rest position. The material retraction function can be adjusted on the valve. The valve is opened with the control air. The valve plunger unit moves downwards and material can flow via the material inlet to the material outlet. Optionally, auxiliary air can also be used for faster closing. Otherwise the valve closes by spring force. A small oiler can be used to create a moisture barrier if moisture-sensitive material is metered.

Typical fluids dispensed:
adhesives, oils/greases/lubricants, silicones (RTV)/gels, solder pastes/pastes/PVA

Wetted parts material :
aluminium, PTFE, Viton, stainless steel 1.4305

  • Versandgewicht 0.32 kg
  • Operace pneumatic (pressure+time)
  • Außen-Ø 35 mm
  • Materialeinlass 1/8 inch
  • Antrieb pneumatic
  • Drucklufteingang M5
  • Betriebsdruck (min.) 3,5 bar
  • Medienberührend Aluminium, PTFE, Viton, stainless steel 1.4305
  • Material aluminium
  • Gewicht 140 g
  • Länge 102 mm
  • Materialauslass 1/8 inch
  • Materialviskosität (max.) 1.000.000 mPas
  • Durchflussmenge 2700 ml/min (H2O, 7 bar)
  • Dosiermenge (min.) 0,05 ml
  • Schaltfrequenz 700 cycle/min
  • Materialdruck (max.) 34 bar

Technische Zeichnungen:

  • Klebstoffe +
  • Säuren
  • Alkohol / Methanol
  • Anaerobe Klebstoffe
  • Basen
  • Conformal Coatings +
  • Cyanacrylate
  • Öle / Fette / Schmierstoffe +
  • Silikone 1K (RTV) +
  • Lotpaste +
  • Dichtungen
  • Lösungsmittel
  • UV-Klebstoffe
  • FDA-Konform +
Seal Kit 1
Art.-Nr. 507650
Product-ID V-0062
Reparatur Kit #1
Repair kit incl. elbow fitting and seal kit
Seal Kit 2
Art.-Nr. 507653
Product-ID V-0065
Reparatur Kit #2
comprehensive valve service&repair kit
valve controller VC1000
Art.-Nr. 507711
Product-ID VC1060
Ventilsteuergerät VC1000
Our Model VC1000 controls all pneumatic dispensing valve types equipped with "return" springs for automatic closing. The added benefit of the VC1000 is that it pressurizes not only the dispensing valve actuation but also the fluid...
Heater for dispensing valves
Art.-Nr. 504188
Product-ID 990259
Ventilheizung für DV-5325 /SS, 5425 /SS, SV1000SS|20-45° C, 24V DC
Valve heater for DV-5325 /SS, 5425 /SS, SV1000SS 20-45° C 24V DC
Mounting bracket for valves
Art.-Nr. 504096
Product-ID 990241
Attachment for valves, suitably: DV-5325 / SS, DV-5425 / SS, SV-1217