volume dispenser preeflow® eco-PEN600

Art.-Nr. 505165
Product-ID ECO-PEN600

endless piston principle, flow rate 1,4 up to 16 cc/min

2 913,28 € * / pièce
Množství Cena za kus / pièce
Do 3 2 913,28 € *
Od 4 2 825,90 € *
Od 10 2 767,63 € *

Ceny plus DPH plus náklady na dopravu

Termín dodání na vyžádání

The preeflow® eco-PEN600 is a volumetric dispensing system. In this system the proven technology of the eccentric screw pump is designed and manufactured in a miniaturized version. New manufacturing processes and materials are used to convert the complex geometries of the screw auger and the stator into this small design. Material can flow and be metered in very small volumes, fully volumetrically, out of the valve and also in “reverse” inward fashion. This ensures a very clean and precise dispensing of the material.

Functionality:
The preeflow® eco-PEN600 is a rotating, pressure-tight displacement system. It consists of a stainless steel rotor and an elastomer stator which together form a self-sealing system. This creates individual, self-contained volume “chambers”. As a result of the rotational movement of the stator, the volume “chambers” are pushed further, thereby generating the material flow. For low-viscosity products, the system is self-priming. To control the preeflow speed control 

 
  • Abmessungen (BxHxT) 34x34x274 mm
  • Versandgewicht 1.2 kg
  • Operace volumetric
  • Materialeinlass 1/4 inch
  • Antrieb electromotive
  • Betriebsdruck (min.) 0 bar
  • Medienberührend HD-POM, stainless steel
  • Material POM
  • Inhalt Vol 5,2 cc Totvolumen
  • Gewicht 750 g
  • Materialauslass Luer-Lock, O-Ring
  • Spannung 18 - 24 V DC
  • Durchflussmenge 1,4 .. 16 ml/min
  • Dosiermenge (min.) 0,015 ml
  • Materialdruck (max.) 20 bar

Technische Zeichnungen:

Tech_505165_0
 
  • Klebstoffe +
  • Säuren +
  • Alkohol / Methanol
  • Anaerobe Klebstoffe +
  • Basen
  • Conformal Coatings +
  • Cyanacrylate
  • Öle / Fette / Schmierstoffe +
  • Silikone 1K (RTV) +
  • Lotpaste +
  • Dichtungen +
  • Lösungsmittel
  • UV-Klebstoffe +
  • FDA-Konform +
  • Wärmeleitpaste +
Související
finger switch
Art.-Nr. 503480
Product-ID 990105-ECO600
finger switch
UHU-PLUS-SCH-50N is a solvent free 2-component epoxy resin adhesive for quick and strong assemblies. Enables high-strength adhesive bonds to almost all solid materials. Working time up to 5 minutes. Initial strength achieved after 20...
valve controller Speed Control "plug'n'dose" TP
Art.-Nr. 505016
Product-ID ECO-20455
Ventilsteuergerät Speed Control „plug´n´dose“ TP
The preeflow Speed Control "plug'n'dose" TP control unit allows you to control the eco-PEN using a simple time/pressure control unit. Operating principle: Microprocessor-controlled. The supplied pressure adapter is connected to a...
valve controller Speed Control "plug'n'dose" AM
Art.-Nr. 505019
Product-ID ECO-20462
Ventilsteuergerät Speed Control „plug´n´dose“ AM
The preeflow Speed Control "plug'n'dose" AM control unit has been developed specifically for applications in automation. [Operating principle:] Microprocessor-controlled. External signals such as the dispensing speed and dispensing time...
Venting screw Stainless steel
Art.-Nr. 505028
Product-ID ECO-20510-SS
Venting screw Stainless steel
eco-PEN, not suitable for POM housings! Fits only for "old" stainless steel pump housing with central bleeding bore 504955 ecoPEN450/330 504929 ecoPEN600/700
Heater for ecoPENs for dispense tip
Art.-Nr. 504068
Product-ID 990238-ECO
Heizung für eco-PEN´s
Needle heater for ecoPEN´s for dispense tips with stainless steel capillaries and a minimum length of half an inch.  Specs: 20-45° C 24V DC
Seal for venting screw
Art.-Nr. 505043
Product-ID ECO-20727
Dichtung für Entlüftungsschraube für eco-PENs
Dichtung für Entlüftungsschraube für eco-PENs
Union holder for dispensing tip at eco-PEN
Art.-Nr. 503607
Product-ID 990145
Union holder for dispensing tip at eco-PEN
Dosiernadelniederzieher für eco-PEN Edelstahl 1.4305 (zweiteilig)
Pressure monitoring system QC-100
Art.-Nr. 501092
Product-ID QC-100
Qualitätsüberwachung QC-100
The QC-100 quality monitoring system facilitates the acquisition and evaluation of pressure signals from up to two sensors and provides the operator with immediate detailed information about the quality of the dispensing process. The...
eco-CONTROL EC200 2.0
Art.-Nr. 508338
Product-ID eco-EC200-2.0
eco-CONTROL EC-200 2.0
The dispensing control unit has been developed and tested for high-precision work with 1-component eco-PEN valves. The dispensing system has a wide variety of setting options for the dispensing quantity and time. All the values that are...
Zobrazeno