volume dispenser preeflow® eco-PEN300

Art.-Nr. 505158
Product-ID ECO-PEN300

endless piston principle, flow rate 0,12 up to 1,48 cc/min

3 038,52 € * / pièce
Množství Cena za kus / pièce
Do 3 3 038,52 € *
Od 4 2 947,50 € *
Od 10 2 886,60 € *

Ceny plus DPH plus náklady na dopravu

Připraveno k odeslání ještě dnes,
Dodací doba cca. 1-3 pracovní dny

zu den Ersatzteilen

The preeflow® eco-PEN300 is a volumetric dispensing system. In this system the proven technology of the eccentric screw pump is designed and manufactured in a miniaturized version. New manufacturing processes and materials are used to convert the complex geometries of the screw auger and the stator into this small design. Material can flow and be metered in very small volumes, fully volumetrically, out of the valve and also in “reverse” inward fashion. This ensures a very clean and precise dispensing of the material.

The preeflow® eco-PEN300 is a rotating, pressure-tight displacement system. It consists of a stainless steel rotor and an elastomer stator which together form a self-sealing system. This creates individual, self-contained volume “chambers”. As a result of the rotational movement of the stator, the volume “chambers” are pushed further, thereby generating the material flow. For low-viscosity products, the system is self-priming. To control the preeflow speed control  "plug n dose" is required.

  • Abmessungen (BxHxT) 29x29x216 mm
  • Versandgewicht 0.8 kg
  • Operace volumetric
  • Materialeinlass 1/8 inch
  • Antrieb electromotive
  • Betriebsdruck (min.) 0 bar
  • Medienberührend HD-POM, stainless steel
  • Material POM
  • Inhalt Vol 3 cc Totvolumen
  • Gewicht 380 g
  • Materialauslass Luer-Lock, O-Ring
  • Spannung 18 - 24 V DC
  • Durchflussmenge 0,12 .. 1,48 ml/min
  • Dosiermenge (min.) 0,001 ml
  • Materialdruck (max.) 20 bar

Technische Zeichnungen:

  • Klebstoffe +
  • Säuren +
  • Alkohol / Methanol
  • Anaerobe Klebstoffe +
  • Basen
  • Conformal Coatings +
  • Cyanacrylate
  • Öle / Fette / Schmierstoffe +
  • Silikone 1K (RTV) +
  • Lotpaste +
  • Dichtungen +
  • Lösungsmittel
  • UV-Klebstoffe +
  • FDA-Konform +
valve controller Speed Control "plug'n'dose" TP
Art.-Nr. 505016
Product-ID ECO-20455
Ventilsteuergerät Speed Control „plug´n´dose“ TP
The preeflow Speed Control "plug'n'dose" TP control unit allows you to control the eco-PEN using a simple time/pressure control unit. Operating principle: Microprocessor-controlled. The supplied pressure adapter is connected to a...
valve controller Speed Control "plug'n'dose" AM
Art.-Nr. 505019
Product-ID ECO-20462
Ventilsteuergerät Speed Control „plug´n´dose“ AM
The preeflow Speed Control "plug'n'dose" AM control unit has been developed specifically for applications in automation. [Operating principle:] Microprocessor-controlled. External signals such as the dispensing speed and dispensing time...
Metal elbow 90° fitting combination 1/4" to 1/8''
Art.-Nr. 503920
Product-ID 990208-002
Metal elbow 90° fitting combination 1/4" to 1/8''
Metal elbow 90° fitting combination. Material inlet 1/4'' DKZ Parker fitting (e.g. for 600 cc cartridge) Material outlet 1/8'' (e.g. material inlet valve)
Handle for volumetric valves eco-PEN300 and...
Art.-Nr. 501229
Product-ID 560598V-003
Handle for volumetric valves eco-PEN300 and eco-PEN450
The handle 560598V-003 is used to hold the volume metering valves eco-PEN300 and eco-PEN450 in conjunction with the corresponding control units. The triggering takes place via the built-in switch. As a result, an exact, hand-guided...
Heater for ecoPENs for dispense tip
Art.-Nr. 504068
Product-ID 990238-ECO
Heizung für eco-PEN´s
Needle heater for ecoPEN´s for dispense tips with stainless steel capillaries and a minimum length of half an inch.  Specs: 20-45° C 24V DC
Seal for venting screw
Art.-Nr. 505043
Product-ID ECO-20727
Dichtung für Entlüftungsschraube für eco-PENs
Dichtung für Entlüftungsschraube für eco-PENs
Union holder for dispensing tip at eco-PEN
Art.-Nr. 503607
Product-ID 990145
Union holder for dispensing tip at eco-PEN
Dosiernadelniederzieher für eco-PEN Edelstahl 1.4305 (zweiteilig)
eco-CONTROL EC200 2.0
Art.-Nr. 508338
Product-ID eco-EC200-2.0
eco-CONTROL EC-200 2.0
The dispensing control unit has been developed and tested for high-precision work with 1-component eco-PEN valves. The dispensing system has a wide variety of setting options for the dispensing quantity and time. All the values that are...
Mounting bracket for cartridge
Art.-Nr. 503590
Product-ID 990138-04
Kartuschenhalter für 30/55cc für ecoPEN-450
Cartridge holder for 30/55 cc for eco-PEN300, eco-PEN330 and eco-PEN450