spray valve SV-2002N

Art.-Nr. 507332
Product-ID SV-2002N

min 12 mm spray range for low to medium viscosity materials, valve body stainless steel

1 113,95 € *

Ceny plus DPH plus náklady na dopravu

Připraveno k odeslání ještě dnes,
Dodací doba cca. 1-3 pracovní dny

The spray valve Model SV-2002 can spray very small amounts of low and medium viscosity fluids in a uniform and controlled manner. The material, which is stored in a barrel, cartridge or a pressure vessel, is fed to the valve directly from the material container via a tube. With the appropriate VC1200 series control unit, the valve is pneumatically operated. Using the features of the control unit, the “pre” and “post” spray time, as well as the actual spraying time can be set separately. The “pre” and “post” spray set times are used for cleaning the spray nozzle in order to achieve uniform and repeatable dispensing results. The different versions of the spray valve models SV-2001N and SV-2003N allow different spray patterns. 

 
  • Operace spray (pressure+time)
  • Materialeinlass 1/8 inch NPT
  • Antrieb pneumatic
  • Drucklufteingang M5
  • Material stainless steel
  • Gewicht 250 g
  • Materialviskosität (max.) 1.000 mPas
  • Durchflussmenge 2400 ml/min
  • Schaltfrequenz 200 cycle/min
  • Materialdruck (max.) 7 bar

Technische Zeichnungen:

Tech_507332_0
 
  • Klebstoffe +
  • Säuren
  • Alkohol / Methanol +
  • Anaerobe Klebstoffe +
  • Basen
  • Conformal Coatings +
  • Cyanacrylate --
  • Öle / Fette / Schmierstoffe +
  • Silikone 1K (RTV)
  • Lotpaste
  • Dichtungen
  • Lösungsmittel +
  • UV-Klebstoffe +
Související
spray valve controller VC1200
Art.-Nr. 507720
Product-ID VC1260
Ventilsteuergerät VC1200
The digital control device VC1200 allows precise control of spray valves. It controls the compressed air used to open and close the valve, as well as pressurized air used to atomize the material at the spray jet. The air pressure used...
Wiper II
Art.-Nr. 507924
Wiper II
The Wiper II is used to automatically clean dirty needles on dispensing devices. On the top of the cleaning device there is a gripper mechanism with flexible gripper jaws that enclose a cleaning belt. The soiled needle is inserted into...
Mounting bracket for valves
Art.-Nr. 503980
Product-ID 990215
Ventilhalter passend für Ventile: VD-510 Serie, DV-5625-U
Attachment for valves, suitably: VD-510 series, DV-5625-U
Zobrazeno