Jet valve drive DV-6210
Product ID: DV-6210
The jetting DV-6210-System by this driver is optimally suited for micro-dispensing in fast and high-precision production processes where precise application of high-quality fluids is required: The DV-6210 drives a high-speed jetting valve with a highly efficient piezo actuator for non-contact dispensing of low- and medium-viscosity fluids up to 8000 mPas. The piezo technology speeds up the dispensing cycle and allows extremely fast opening and closing of the valve, resulting in higher throughput and improved system performance of your production plant. The achievable slopes allow new applications and dispensing cycles up to 3000 Hz.
The modular design and the easy exchange of the few accessories to be added, such as nozzles and fluidics, allow the system to be optimally adapted to customer-specific applications. In addition to the standard version without heating, there are variants with heated fluidics or fluidics made of PEEK for anaerobic adhesives. The nozzles are interchangeable and VIEWEG offers a variety of nozzle inserts in different shapes and with different diameters ranging from 30 µm to 1200 µm. The plungers in the drive are available with different geometries in ceramic or carbide.
Features (with optional system):
- Dimensions W x D x H 12 x 39.5 x 115 mm
- Weight min. 258 g (depending on configuration)
- Dispensing quantity: nano and sub-nano range (depending on the fluid).
- Viscosity range: up to approx. 8,000 mPas
- Drive piston available in ceramic or carbide with different geometries
- Interchangeable nozzle, different. Shapes and diameters (30 µm - 1200 µm)
- Dispensing frequency up to 3,000 Hz
- Supply pressure 0.1 to 8 bar (rel.)
- Optional heating system for fluidics: <120°C, higher on request
Actuator: | closed (NC) |
---|---|
Doporučení: | Aqueous solutionConformal coatingsGreases, lubricantsOilSiliconUV glueVarnish, paint |
Dávkovací metoda: | jetting / contactless |
Dávkovací množství (min.): | Nano- und Subnano-Bereich |
Dávkovaný materiál: | AcidsBasesEpoxyMethacrylateOil, greases, lubricantsProtective lacquersSealantsSilicones 1k (RTV)SolventsUV adhesives |
Dávkovatelné tvary : | Lines (string/rope)Points (dot) |
Díly v kontaktu s materiálem: | Stainless steel |
Díly v kontaktu s materiálem (E): | O-RingStainless steeloptional FDA-conform |
Hmotnost (g): | 260 |
Materiál: | Stainless steel-- |
Pohon: | NCpiezo-electric |
Ventil: | DV-6210 |
Viskozita: | 8.000 mPaslow viscosity |