needle valve DV-5425
Product ID: DV-5425
1 309,88 € *
| Množství | Jednotková cena |
|---|---|
| Do 3 |
1 309,88 €*
|
| Do 9 |
1 272,74 €*
|
| Od 10 |
1 246,40 €*
|
The needle valve DV-5425 was especially developed for dispensing of low to medium viscosity materials. The DV-5425 needle valve enables control of material from extremely small individual shots to continuous beads. The needle dispensing valve is pneumatically controlled. The slim design allows for installation in automated lines and a high packing density.
Functionality
The valve is closed in the idle state. The opening gap is adjustable on the valve. The valve is opened with the control air. The valve needle moves up out of the seat and the material can then flow through the material input to the material output. Optionally, auxiliary air can be used for faster closure. Otherwise, the valve closes using spring force.
Dispensing materials
Adhesives, UV adhesives, Alcohol/Methanol, Oils/Greases/Lubricants
| Actuator: | closed (NC) |
|---|---|
| Doporučení: | Aqueous solutionConformal coatingsGreases, lubricantsOilSiliconUV glue |
| Dávkovací metoda: | pneumatic (pressure & time) |
| Dávkovací množství (min.)(ml): | 0.003 |
| Dávkovaný materiál: | AdhesivesInks and coloursOil, greases, lubricantsProtective lacquersSilicones 1k (RTV)SolventsUV adhesives |
| Dávkovatelné tvary : | Lines (string/rope)Points (dot) |
| Délka (mm): | 110 |
| Díly v kontaktu s materiálem: | Alu |
| Díly v kontaktu s materiálem (E): | AluminiumCarbidePTFEStainles steel 1.4305Viton |
| Frekvence: | 600 cycle/min |
| Hmotnost (g): | 140 |
| Materiál: | Aluminium |
| Pohon: | pneumatic |
| Průtok: | 1680 ml/min (H2O, 7 bar) |
| Viskozita: | 100.000 mPaslow viscositymedium viscosity |
| Viskozita materiálu (max.): | 100.000 mPas |
| Vnější Ø (mm): | 28.5 |
| Vstup materiálu: | 1/8" |
| Výstup materiálu: | Luer-Lock |
Dazu passend
Dazu passend
